Extremely important information!
“Proper and safe disposal of free liquids”?
Are you in compliance with EPA regulations?
All manufacturers making claims of producing a land fill safe absorbent are required per the CFR, (Code of Federal Regulations), to have their product tested per the TCLP, (Toxicity Characteristic Leaching Procedures) test. If the product passes, then the test results must be supplied the end user. The end user is required to keep a copy on hand to prove they are in compliance with current EPA guidelines. Has the EPA knocked on your door lately?
At first glance this may look like a lot of boring reading and maybe you are short on time, however those of you who decide to take the time to read and digest this extremely important information will gain knowledge which can and will save your company lots of headaches, possible fines into the thousands, and hundreds to literally thousands in disposal cost.
Environmental policies have become increasingly stricter, more difficult to understand, & ever more costly to adhere to. Most companies I have spoken with either rely on consultants, who are terribly expensive or have only one or two people who are at best barely familiar with the "Code of Federal Regulations" which contains EPA disposal regulations. When making decisions regarding disposal of any industrial liquids, we all want to do what is proper and best for our company and the environment. Today, the decisions we make to preserve and protect our environment are extremely important and not to be taken lightly. The decisions you make today will be a major influence in how the public views your company tomorrow. A safe environment is the most important heritage we can leave our children!
What are the correct answers & products for your needs?
Pay close attention to what you are about to read
The choices you make today can weigh highly in your favor...
or they can weigh heavily to your disdvantage!
As the owner of this company you deserve to know a little bit about me. Here are a few things I firmly believe in:
Environmental Spill Control, LLC, Dba Spill Control Technology manufactures only the highest quality spill control products which are designed to meet and exceed all your spill control needs.
FACTS
Are you in compliance with EPA regulations?
All manufacturers making claims of producing a land fill safe absorbent are required per the CFR, (Code of Federal Regulations), to have their product tested per the TCLP, (Toxicity Characteristic Leaching Procedures) test. If the product passes, then the test results must be supplied the end user. The end user is required to keep a copy on hand to prove they are in compliance with current EPA guidelines. Has the EPA knocked on your door lately?
At first glance this may look like a lot of boring reading and maybe you are short on time, however those of you who decide to take the time to read and digest this extremely important information will gain knowledge which can and will save your company lots of headaches, possible fines into the thousands, and hundreds to literally thousands in disposal cost.
Environmental policies have become increasingly stricter, more difficult to understand, & ever more costly to adhere to. Most companies I have spoken with either rely on consultants, who are terribly expensive or have only one or two people who are at best barely familiar with the "Code of Federal Regulations" which contains EPA disposal regulations. When making decisions regarding disposal of any industrial liquids, we all want to do what is proper and best for our company and the environment. Today, the decisions we make to preserve and protect our environment are extremely important and not to be taken lightly. The decisions you make today will be a major influence in how the public views your company tomorrow. A safe environment is the most important heritage we can leave our children!
What are the correct answers & products for your needs?
Pay close attention to what you are about to read
The choices you make today can weigh highly in your favor...
or they can weigh heavily to your disdvantage!
As the owner of this company you deserve to know a little bit about me. Here are a few things I firmly believe in:
- Greed is totally unecessary. Charge a fair price for an honest and well made product.
- Promise a little and deliver a lot!
- Treat one's customer as a future friend
- Tell the truth.
- The truth always stands tall.
- The truth will set you free
- IF one always tells the truth, one doesn't have to tell a lie to cover another lie. Lying eventually catches up to you.
- Stick with the facts. You will never hear me lie about or exaggerate about what my products will do.
- Let the products speak for themselves. In the case of White Lightning, the truth is definitely stranger than fiction. The demonstration video will blow you away! You will ask yourself, "Did I just see what I thought I saw."
Environmental Spill Control, LLC, Dba Spill Control Technology manufactures only the highest quality spill control products which are designed to meet and exceed all your spill control needs.
FACTS
- White Lightning has been tested per the EPA’s TCLP
- White Lightning exceeds all EPA test parameters, (Requirements for absorbed liquids in landfills). When using White Lightning, you can "Legally" Landfill ALL of your liquid industrial waste, such as motor oils, lubricants, antifreeze, brake fluid, hydraulic fluid, mineral oil, etc. These test were performed by REI Consultants, a nationally recognized company, (Refer to the Technical & Safety section in our catalog).
- White Lightning is non-selective. It picks up & encapsulates any liquid or semi liquid upon contact!
- White Lightning is very simple to use! The average time to clean up one quart, (32 oz.), of motor oil is only 90 seconds, (1½ minutes), (Refer to our "Test Results" found in the Technical section on this website). The floor is CLEAN AND DRY!! No need to mop! (No wet slippery floors and less money spent on expensive detergents!!)
- White Lightning is DEFINITELY economical to use. One auto technician can successfully use one large bag for approximately 90 days! The average cost per day, for one automotive technician is only $.25 cents. Save more by purchasing larger quantities. (For pricing, call, e-mail, or fill in the contact information form found on this site).
- One bag, (1.70 cu. ft.), of White Lightning will absorb approximately 2.5 gallons of any liquid or semi-liquid substance, (Yes, that reads..."ANY")!
- One 1.7 cu. ft. bag of White Lightning is equivalent to 4 forty pound bags, (160 lbs.), of clay product.
- White Lightning goes a l- o- n- g way. A little bit does a lot. Sometimes too much is dispersed. When that happens, recycle it in our Recycle Center for future use .
- White Lightning can be recycled for many reuses. There is little to NO waste!
- FYI: Clay products are incapable of completely cleaning up any spill of any kind. Clay simply adds liquid to its surface. Technically it is an "adsorbent."
- Mops leave surfaces wet & slippery, and never totally removes all of the oil from the surface.
- White Lightning leaves the surface dry and totally clean!
- White Lightning cleans up a spill more efficiently than any other method or product!! If you don't believe it, try it risk free! If when used properly White Lightning does not out perform what you have been using return the unused portion with your receipt, and a brief explanation for a full refund.
- To date, I have never been asked for a refund!
- White Lightning is Non-Toxic, non carcinogenic, and non corrosive. There are NO health risks of any kind associated with White Lightning! (Refer to Health, Safety, &Technical section in our catalog). Clay products are dirty and dusty. The EPA considers clay adsorbents to be carcinogens. Read the warning label on the bag! It clearly states clay is known to cause silicosis of the lungs. A deadly disease!
- White Lightning is conveniently packaged in three sizes: The 0.40 cu. ft. bag, and a 1.0 cu. ft. bag. Both of these bags are for small to medium spills and both fit handily under a push cart and or in a cabinet. The larger 1.7 cu. ft. bag is of course for large spills. All three are packaged in a tough 6 mil clear poly bag, so you always see what you are paying for.
VERY IMPORTANT COMPARISON
( If you want to save some serious money )
Companies using drums to dispose of their liquid waste WIN BIG with White Lightning.
Many of the companies I have visited were disposing of thousands of pounds of contaminated soaked clay adsorbents in 55 gallon drums. This is a slow, labor intensive, and super expensive method of disposal, which reaps no benefits short of keeping you in good standing with the EPA. The cost is normally passed on to the end user.
According to the test we have performed repeatedly, it takes a minimum of 15 lbs. of clay adsorbent to partially pick up one US quart of any petroleum based liquid. The weight of one quart of oil is 1.75 lbs. The combined weight of the clay and liquid waste is a whopping 16.75 lbs. You have only picked up one quart! The average time it takes to let clay sit and adsorb a quart of liquid waste is approximately 45 minutes. After you pick up your clay, your floor still has a wet slippery spot, which needs immediate attention. Consider this, one 55 gallon drum will contain approximately 4 forty pound bags of oil soaked clay adsorbent. Remember, it takes 15 lbs. of clay per 32 oz. of liquid waste weighing 1.75 lbs. Therefore, four bags of clay weighing 160 lbs. will contain only 10.67 quarts of liquid waste. In layman's terms that is equivalent to only 2 gallons, 2 and 1/3 quarts of liquid waste in each 55 gallon drum. The total weight of the oil soaked clay is now 178 lbs. (Rounded off), not including the weight of the drum.
The cost to ship and dispose of each drum is widely diverse. According to which company one uses the cost can range from around $75.00 up to $300.00 for the exact same drum. The price is driven by supply and demand. I think greed also plays an equal part. The very important point to be made here is "how much your company is paying to dispose of one 55 gallon drum containing only approximately 2 1/2 gallons of liquid waste!" That ain't a lot of value for your dollars!
Please feel free to correct me if I have failed at my math.
On the other hand! One bag of my White Lightning will totally absorb and encapsulate a minimum of 2.5 gallons of any liquid or semi liquid waste! That's right, One bag...2.5 gallons! The bags weigh approximately 20 - 23 lbs. each. It takes only 90 seconds, (1.5 minutes), to absorb and totally clean up 32 oz. of any liquid or semi liquid industrial waste. The surface is clean, dry, and ready to go back to normal traffic. No mopping is necessary!
The same 55 gallon drum as above will hold approximately 4 of my bags of White Lightning containing 10 gallons of totally encapsulated liquid waste.
Which would you prefer paying for to be disposed of...10 gallons or 2.5 gallons? One drum, same price!
It gets better! How would you like to hold onto that money? Did you know, according to the Federal Register companies producing less than 220 lbs. of liquid waste per month may not have to pay disposal cost. That is, if you take care of your liquid waste properly. That means using a product such as White Lightning, which is recognized by the EPA as a total encapsulant.
Sweep it up, recycle it for reuse, and dispose of the remainder, approximately 10%
Just what is a total encapsulant, you asked? In short...whatever the liquid or semi liquid waste is, when it is absorbed into White Lightning the liquid molecule becomes surrounded and attached to the molecules of White Lightning. Therefore, the liquid molecule cannot escape, never!
White Lightning is your company’s BEST CHOICE for cleaning up spills of any size or type.
White Lightning is recognized by the EPA & OSHA as one of the best absorbents in the industry!
In my humble opinion, it is “THE BEST”!!
White Lightning is the one product you can always count on to do exactly as promised!
Going green is easy! OK, here’s your chance. Don’t miss it!
Best regards,
Tom Stone
CEO/PRESIDENT
